WindowBlinds 5 Trouble Already =(

Why Wont it Work?!

Tuesday, October 4, 2005 by xxZeroVirusxx | Discussion: WindowBlinds

I just upgraded my WindowBlinds to 5.0. It just put my computer into Windows Classic mode. I restarted. Same thing. I checked troubleshooting, and it gave me this message:

-------------------
WindowBlinds 5 BETA Troubleshooting Report:


WindowBlinds is not installed correctly on this PC. If you did not reboot after installing WindowBlinds 5 for the first time, then please reboot and try this again.

Your machine supports per pixel borders on WindowBlinds skins.

If you suffer visible corruption (overbright) on the frames and have a NVIDIA board then please be aware this is a NVIDIA bug. It has been seen on GeForce 4 cards and some FX series cards.

Video Information

You have one monitor in total.

(Gateway VX700) 1 is attached to RADEON 9600 PRO Family (Microsoft Corporation)

'RADEON 9600 PRO SEC Family (Microsoft Corporation)' also exists as device '\\.\DISPLAY2', but is not attached to the desktop.

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.

PLEASE report all this information when submitting a problem report, especially anything related to per-pixel skinning. We don't know what's in that Dell you bought last July or the notebook the office gave you. Per-pixel skinning requires your drivers to at least claim to support the functions needed for it.
----------------------------

Isn't installed correctly?! So I uninstalled it, then reinstalled it, and rebooted again. Still, same problem, same message.

By the by, I have Windows XP x64. Is this going to be a problem?
First Previous Page 1 of 9 Next Last
nesl247
Reply #1 Tuesday, October 4, 2005 4:36 PM
Same problem here.. On top of that I have a fx 5200.. Why couldn't you guys test this on x64? I waited my fair share of time too..
NightTrainthedark
Reply #2 Tuesday, October 4, 2005 4:42 PM
WindowBlinds 5 BETA Troubleshooting Report:


WindowBlinds is installed correctly on this PC.

Your machine supports per pixel borders on WindowBlinds skins.

If you suffer visible corruption (overbright) on the frames and have a NVIDIA board then please be aware this is a NVIDIA bug. It has been seen on GeForce 4 cards and some FX series cards.

Video Information

You have 2 monitors.

(hp f1903 flat panel monitor) 1 is attached to NVIDIA GeForce 6600 GT
(hp f1903 flat panel monitor) 2 is attached to NVIDIA GeForce 6600 GT

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.

PLEASE report all this information when submitting a problem report, especially anything related to per-pixel skinning. We don't know what's in that Dell you bought last July or the notebook the office gave you. Per-pixel skinning requires your drivers to at least claim to support the functions needed for it.
NightTrainthedark
Reply #3 Tuesday, October 4, 2005 4:45 PM
Sorry, Same problem as the first poster. Non x 64 though. No skin apply at all. I uninstalled rebooted and reinstalled also. No changes. I turned on my themes service also. Only windows classic.
Frogboy
Reply #4 Tuesday, October 4, 2005 4:45 PM

It's not about testing it on x64, we simply don't have an x64bit version yet.  An x64 version will come.  You can blame Microsoft for their hacky way of implementing 64bit versions, it actually requires a totally different version of WB.

luisalvarado
Reply #5 Tuesday, October 4, 2005 4:47 PM
Does not work on my system either. I have windows xp 64 Professional and a 7800GTX. It would appear as if they didnt do much testing on x64. Some official notification would be nice. I am tempted to install regular winxp just to try it out. After purchasing OD just to try the beta, it is very dissapointing
xxZeroVirusxx
Reply #6 Tuesday, October 4, 2005 4:49 PM
Thanks for the notice, Brad. When can we expect an x64 version? WB5 looks amazing, and I'm considering backing down to 32 JUST for that. But if a version is coming out soon, I won't bother.

P.S. - Next time tell me before I install it, silly =P.
rsplitter
Reply #7 Tuesday, October 4, 2005 4:51 PM
Eh.. Same xxZeroVirusxx as I can't apply any skin

WindowBlinds is installed correctly on this PC.

Your machine supports per pixel borders on WindowBlinds skins.

If you suffer visible corruption (overbright) on the frames and have a NVIDIA board then please be aware this is a NVIDIA bug. It has been seen on GeForce 4 cards and some FX series cards.

Video Information

You have one monitor in total.

(Monitor Plug and Play) 1 is attached to NVIDIA GeForce FX 5700

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.
raydragon
Reply #8 Tuesday, October 4, 2005 4:57 PM
XP Pro SP2, ATI Mobility 9700 with 128M, single display (Dell Inspiron 9200). Installed, rebooted, uninstalled, rebooted, reinstalled, rebooted - no skin application, just "classic" Windows.

Posted via WinCustomize Browser/Stardock Central
rsplitter
Reply #9 Tuesday, October 4, 2005 4:57 PM
Hmm, if you select a theme through Display Properties > Appearance it loads the default windows classic theme on every WB theme..
xxZeroVirusxx
Reply #10 Tuesday, October 4, 2005 4:57 PM
I just tried to run it on my brother's computer. His graphics card is only like 64-MB. On his computer, WB is installed correctly, but per-pixel is disabled (because it says it isn't able to do it).

Still won't work.

On my other brother's computer (he has a fairly new computer, good graphics card..not quite sure what it is, but I'll add it in a minute). Everything in troubleshooting is fine. Except it still won't work.

Both brothers have 32-bit processors (XP, of course).
NightTrainthedark
Reply #11 Tuesday, October 4, 2005 4:59 PM
Back to luna xp default. aaaaaaaahhh. *twitch* .going back to 4.6, I can't handle this.
Jonep
Reply #12 Tuesday, October 4, 2005 5:03 PM
Can someone please tell me if this info is correct I thought my graphics card would work fine? Radeon 9200 Pro

WindowBlinds 5 BETA Troubleshooting Report:


WindowBlinds is installed correctly on this PC.

Your machine does not support per pixel borders on WindowBlinds skins.

This is because :

Your computer graphics hardware does not support acceleration of per pixel alpha. WindowBlinds requires this for per pixel alphablended borders as without it performance would be poor. Please see if you can obtain new drivers for your graphics hardware. Recent ATI & NVIDIA boards should support this feature. Onboard graphics tend not to.

Video Information

You have one monitor in total.

(Plug and Play Monitor) 1 is attached to RADEON 9200 SERIES

'RADEON 9200 SERIES - Secondary ' also exists as device '\\.\DISPLAY2', but is not attached to the desktop.

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.

Cheer peeps.
operez
Reply #13 Tuesday, October 4, 2005 5:08 PM
WindowBlinds 5 BETA Troubleshooting Report:


WindowBlinds is installed correctly on this PC.

Your machine supports per pixel borders on WindowBlinds skins.

If you suffer visible corruption (overbright) on the frames and have a NVIDIA board then please be aware this is a NVIDIA bug. It has been seen on GeForce 4 cards and some FX series cards.

Video Information

You have one monitor in total.

(Plug and Play Monitor) 1 is attached to RADEON 9800 PRO

'RADEON 9800 PRO - Secondary' also exists as device '\\.\DISPLAY2', but is not attached to the desktop.

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.

Windows XP Pro Test PC, So far working ok, we'll see after installing a few skins if anything happens
bipp5
Reply #14 Tuesday, October 4, 2005 5:12 PM
I'm having no skinning at all whatsoever on my machine, even after an uninstall, reboot, reinstall, reboot. Pentium 4 3.4GHz, 2GB RAM, XP Pro SP2. Here's the troubleshooting thing:

WindowBlinds 5 BETA Troubleshooting Report:


WindowBlinds is installed correctly on this PC.

Your machine supports per pixel borders on WindowBlinds skins.

If you suffer visible corruption (overbright) on the frames and have a NVIDIA board then please be aware this is a NVIDIA bug. It has been seen on GeForce 4 cards and some FX series cards.

Video Information

You have 2 monitors.

(SyncMaster 730B(Digital)) 1 is attached to ALL-IN-WONDER X800 Series
(Plug and Play Monitor) 2 is attached to ALL-IN-WONDER X800 Series Secondary

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.
xxZeroVirusxx
Reply #15 Tuesday, October 4, 2005 5:16 PM
Is there anyone who doesn't have the FX series card, has Windows XP 32-bit, has only one monitor listed, and whose machine supports per pixel borders? I'm wondering if the problem is any combination of what I listed.
Brokensquare
Reply #16 Tuesday, October 4, 2005 5:20 PM
Slightly diff problem here...wbconfig won't even start...errors out and gives me classic theme..boooo!
P4 1.6 ghz, ati radeon 9700 running 2 monitors...happened upon prompt reboot, and every time I try to apply skins...wbconfig won't load, and display properties just gives me classic theme...cant do WB troubleshooting because wbconfig won't load, so no other info available...
Castle
Reply #17 Tuesday, October 4, 2005 5:21 PM
Arghhhh!
Nothing but default windows
WindowBlinds 5 BETA Troubleshooting Report:

- troubleshooting report -
WindowBlinds is installed correctly on this PC.

Your machine supports per pixel borders on WindowBlinds skins.

If you suffer visible corruption (overbright) on the frames and have a NVIDIA board then please be aware this is a NVIDIA bug. It has been seen on GeForce 4 cards and some FX series cards.

Video Information

You have one monitor in total.

(Dell P1110) 1 is attached to RADEON 9800 PRO

'RADEON 9800 PRO - Secondary' also exists as device '\\.\DISPLAY2', but is not attached to the desktop.

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.

Back to Vista Brico pack 1.1 .....for now.
Neil Banfield
Reply #18 Tuesday, October 4, 2005 5:21 PM

BrokenSquare: look for wblind.dll in your install directory.  Is it there?

Green Armani
Reply #19 Tuesday, October 4, 2005 5:23 PM
After installing and rebooting nothing is skinned. Initially I thought that I had to choose a skin and then apply it but none of the skins tha I choose will work. Here is the troubleshooting info which doesn't really suggest something is wrong, but it's only my work computer anyway....now if I have problems on my green machine at home......I MIGHT JUST KILL MYSELF!!! Keep up the awesome work guys

WindowBlinds 5 BETA Troubleshooting Report:


WindowBlinds is installed correctly on this PC.

Your machine supports per pixel borders on WindowBlinds skins.

If you suffer visible corruption (overbright) on the frames and have a NVIDIA board then please be aware this is a NVIDIA bug. It has been seen on GeForce 4 cards and some FX series cards.

Video Information

You have one monitor in total.

(Plug and Play Monitor) 1 is attached to Intel(R) 82865G Graphics Controller

'NetMeeting driver' also exists as device '\\.\DISPLAYV1', but is not attached to the desktop and is a mirror driver.

'RDPDD Chained DD' also exists as device '\\.\DISPLAYV2', but is not attached to the desktop and is a mirror driver.
xxZeroVirusxx
Reply #20 Tuesday, October 4, 2005 5:23 PM
Are you on 32-bit? What Service Packs do you have installed? 2 monitors could be a problem, as I already listed. Have you tried rebooting again?

And, lastly, why on earth are you on a 1.6ghz computer and using a sweet card like the 9700?

Please login to comment and/or vote for this skin.

Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:

  • Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
  • Access to a great community, with a massive database of many, many areas of interest.
  • Access to contests & subscription offers like exclusive emails.
  • It's simple, and FREE!



web-wc01