![Cobalt Zin[cave]](https://skins15.wincustomize.com/0/1/1354/20/5/preview-20-5-100x75.jpg?d=991713824.453)
jdeskworkarea (litestep) & windowblinds
Tuesday, February 3, 2004 by joel2600 | Discussion: WinCustomize Talk
I created a nice desktop setup with litestep which you can see here if ya want.
http://www.joelmagoun.com/images/ss.JPG
anyways, my jdeskwork area is set so that when windows are maximized they don't overtake my taskbar up top, so my only setting is for the top
jdeskworkarea "0,78,0,0"
when i run windowblinds with any skin, when the window becomes maximized it's hard to explain so i'll have to show this in a a screenshot...
http://www.joelmagoun.com/images/ss3.JPG
basically, the window goes above where the workarea is, but gets cutoff at the point where the workarea border is... not only that but now the maximized window comes off the ground, whereas before if the window were maximized it would have extended all the way to the bottom of the screen.
i could possibly understand why it may get cut off at the top, but moving up off the ground?
anyone else have this problem, or ever see anything like this or have any suggestions?
changing the jdeskworkarea so far has proved to be futile as the changes i make only just seem to cut things off further...
comments, questions, help appreciated
http://www.joelmagoun.com/images/ss.JPG
anyways, my jdeskwork area is set so that when windows are maximized they don't overtake my taskbar up top, so my only setting is for the top
jdeskworkarea "0,78,0,0"
when i run windowblinds with any skin, when the window becomes maximized it's hard to explain so i'll have to show this in a a screenshot...
http://www.joelmagoun.com/images/ss3.JPG
basically, the window goes above where the workarea is, but gets cutoff at the point where the workarea border is... not only that but now the maximized window comes off the ground, whereas before if the window were maximized it would have extended all the way to the bottom of the screen.
i could possibly understand why it may get cut off at the top, but moving up off the ground?
anyone else have this problem, or ever see anything like this or have any suggestions?
changing the jdeskworkarea so far has proved to be futile as the changes i make only just seem to cut things off further...
comments, questions, help appreciated
BoXXi
Reply #2 Tuesday, February 3, 2004 11:47 AM
Reply #2 Tuesday, February 3, 2004 11:47 AM
Also, please try not to post screenshots that contain profanity.....Thanks.
joel2600
Reply #3 Tuesday, February 3, 2004 1:06 PM
Reply #3 Tuesday, February 3, 2004 1:06 PM
yeah, missed that, i had taken that shot for a friend and just thought i'd reuse it.
i just updated that image to remove that... anyways.... back to the original topic.
has anyone seen this sort of thing and / or can it be fixed.
i just updated that image to remove that... anyways.... back to the original topic.
has anyone seen this sort of thing and / or can it be fixed.
Phar0e
Reply #4 Tuesday, February 3, 2004 5:50 PM
Reply #4 Tuesday, February 3, 2004 5:50 PM
hmmm, there used to be a tweak in the old builderblinds utility that had a setting for maximized windows, that I recall solved this problem many moons ago for me.
I don't know if current versions of skin studio have this or not. I don't think that windowblinds has this setting in it's configuration screens.
Hopefully a windowblinds guru can steer us in the right direction.
I don't know if current versions of skin studio have this or not. I don't think that windowblinds has this setting in it's configuration screens.
Hopefully a windowblinds guru can steer us in the right direction.
moshi
Reply #5 Wednesday, February 4, 2004 9:40 AM
Reply #5 Wednesday, February 4, 2004 9:40 AM
does everything work ok without WindowBlinds? (just to be sure)
[Message Edited]
[Message Edited]
joel2600
Reply #6 Wednesday, February 4, 2004 3:45 PM
Reply #6 Wednesday, February 4, 2004 3:45 PM
yeah, w/o windowblinds everything works great. right now i'm using my existing setup without windowblinds and all of my windows stay within my workarea, and when maximized the window takes up the entire screen except for the 78 pixels or top reserved for the taskbar area.
with windowblinds (with any skin) when the window gets maximized it gets all jacked up like in that second screenshot where the window is off the ground by 100+ pixels and also cuts the top off near the top of the work area.
i have a feeling this a problem that isn't going to be solved.
with windowblinds (with any skin) when the window gets maximized it gets all jacked up like in that second screenshot where the window is off the ground by 100+ pixels and also cuts the top off near the top of the work area.
i have a feeling this a problem that isn't going to be solved.
Jafo
Reply #7 Wednesday, February 4, 2004 6:58 PM
Reply #7 Wednesday, February 4, 2004 6:58 PM
There's a line to include in a file called wb.ini in your Windows folder but for the life of me I can't remember it.
something like... show max=1
Memory is the first to go....
Jafo
Reply #8 Wednesday, February 4, 2004 7:00 PM
Reply #8 Wednesday, February 4, 2004 7:00 PM
Here's what's typically in it.....[just needs that other line...
[Global]
Path=C:\Program Files\Object Desktop\WindowBlinds
forceDDB=1
noProgress=0
noTabs=0
noScroll=0
nosound=0
SkinDisplay=1
console=1
HyperPaintMode=2
hyperpaint=0
HideMinMax=1
ResizeOpt=1
moshi
Reply #9 Thursday, February 5, 2004 11:43 AM
Reply #9 Thursday, February 5, 2004 11:43 AM
same problem with all skins?
there is one setting in WB skins that could interfer with desktop area settings.
try this:
- quit WB
- open the *.UIS file of the skin you used with a text editor
- look for these settings:
MaxBorderCutLeft=0
MaxBorderCutTop=0
MaxBorderCutRight=0
MaxBorderCutBottom=0
- first try to set all these settings to 0 and start WB again
- if this does not help, quit WB and delete these four settings and try again
if all this does not help, try using desktop2.dll instead of jdesk.dll
else get a uxtheme patcher and switch to msstyles.
there is one setting in WB skins that could interfer with desktop area settings.
try this:
- quit WB
- open the *.UIS file of the skin you used with a text editor
- look for these settings:
MaxBorderCutLeft=0
MaxBorderCutTop=0
MaxBorderCutRight=0
MaxBorderCutBottom=0
- first try to set all these settings to 0 and start WB again
- if this does not help, quit WB and delete these four settings and try again
if all this does not help, try using desktop2.dll instead of jdesk.dll
else get a uxtheme patcher and switch to msstyles.
joel2600
Reply #10 Thursday, February 5, 2004 1:13 PM
Reply #10 Thursday, February 5, 2004 1:13 PM
thanks for the advice, i'll mess with it tonight and let you all know how it goes.
much appreciated!
much appreciated!
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!
Reply #1 Tuesday, February 3, 2004 11:10 AM
*personal note*