Question about digital TV receiver video cards
Tuesday, June 17, 2003 by paxx | Discussion: WinCustomize Talk
I am slowly shopping around for my next PC. I would like to have a TV tuner on it. I know some video cards, such as ATI's All-in-One cards, have a TV tuner in it, as do some others such as Matrox. But from what I read, I don't think they work with digital cable, or do they?
I know I could get my TV input from my settop box, but then it means I have to go upstairs in the living room to change the channel I'm going to watch on my PC. A PITA. I don't want that. I'd like to change the channel directly from the PC.
Anybody knows of a good video card that can handle digital tv?
Reply #2 Tuesday, June 17, 2003 10:54 AM
I have a Hauppauge WinTV-PCI card that's probably about 3 years old. I split my cable with a standard coax splitter and run one cable into my digital cable box, and the other into my tv tuner card. Using the WinTV software that came with the card, I can watch one channel on my TV and another on my PC.
However, my card cannot decode the digital portion of the signal. Therefore, channels that I can only recieve with digital cable won't work on my PC. I assume that all cable companies broadcast analog and digital signals together, like Time Warner does. When you subscribe to digital cable, you get a receiver box that can read the digital signal. The signal itself has been there all along though. So what you want to do is find a video/tv tuner card that has a digital receiver built in. Otherwise, you may only be able to watch analog cable channels on your PC.
There still may be another hurdle. Your cable company has to activate your digital cable box from their office. They can also deactivate it from there (if you haven't paid your bill, for example). This would likely mean that your digital tv tuner card would not have access to the digital cable signal without some action on your cable companies part, like leasing you a second digital cable box.
Reply #3 Tuesday, June 17, 2003 11:17 AM
I found that Hauppauge now seem to have a digital receiver (WinTV-D) and $200 istn't too expensive. But your last paragraph gets me thinking, Mike. I wouldn't want to spend that money to see it doesn't work.
Reply #4 Tuesday, June 17, 2003 12:38 PM
| I split my cable with a standard coax splitter and run one cable into my digital cable box, and the other into my tv tuner card. Using the WinTV software that came with the card, I can watch one channel on my TV and another on my PC. |
true..however you only get what the cable company broadcasts as 'local channels'. You will not get the 'premium' channels on your PC and it won't be digital (unless the card is digital capable). If you hook up to a TV-D card it may very well show up at the cable company as an 'extra' pull on that line...not sure what they see or don't see :not sure: I'd weigh the cost difference between getting another box and a cheap card (all the cards are about the same, chipset wise) or an expensive card and a split. It really all depends what you want to watch....
[Message Edited]
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!
Reply #1 Tuesday, June 17, 2003 10:21 AM