Notebook Crashed!!!

Thursday, May 8, 2003 by TODIE4 | Discussion: WinCustomize Talk

Yesterday I downloaded a cursor, the nickname of the person that made the cursor was "Niker" or something like that. Well I opened the folder and it started to open it and my notebook stopped working. I had to turn it off and when it started again nothing worked. The only thing that moves or works is the cursor which returned to the original white plain cursor. I cannot get into anything. I was thinking about using the system recovery discs but I don't know if that will work. I can't lose anything because I have important documents. Any help or suggestions will be very helpful. Thanks Ashley
First Previous Page 1 of 2 Next Last
goodmorphing
Reply #1 Thursday, May 8, 2003 12:54 PM
Sometimes there is a JAVA conflict, I think. I am sure you can fix it without losing data. Have you tried going back to a cursor you used to use? I am not sure on a notebook, but when it happened on my computer I used the window button to get into my program and switch back.
goodmorphing
Reply #2 Thursday, May 8, 2003 12:57 PM
If you hold down the window button and tap E you will get into your C drive. (on a computer). Try going in that way and UNLOADING cursor XP, then reload a different cursor. Then make sure to delete the cursor you had the problem with.
TODIE4
Reply #3 Thursday, May 8, 2003 1:08 PM
Umm...well I tried what you suggested but it will not do anything. Like I said before the computer does respond to anything. Anything else you can think of?
goodmorphing
Reply #4 Thursday, May 8, 2003 1:12 PM
Well, I am not familiar with notebooks at all. I am sure someone with more knowledge will have some answers. Sorry I couldn't help more.
citats
Reply #5 Thursday, May 8, 2003 1:19 PM
Can you provide more info... what Operating system are you using? do you have administrative rights on the notebook?

Powered by SkinBrowser!
TODIE4
Reply #6 Thursday, May 8, 2003 1:22 PM
Thanks goodmorphing for your help.
Yes I can provide more info.
My notebook is HP pavilion ze4125 and it has Windows XP. Yes I have every right to this notebook.
goodmorphing
Reply #7 Thursday, May 8, 2003 1:25 PM
Oh good, Static is here!

sig101
Reply #8 Thursday, May 8, 2003 1:29 PM
Have you tried going into safe mode when the computer starts up? I think pressing the F8 key during startup and before the logon should get you into it. Then you can reset things back to the XP default, uninstall the program, etc.

Powered by SkinBrowser!
citats
Reply #9 Thursday, May 8, 2003 1:31 PM
with XP you have the option of using system restore. You say your mouse works so lets assume you can access your start menu. in the start menu under accessories, system tools select system restore when the program launches select a date and time b4 this occured. If this does not work because you can not access it due to your problems let me know.

Powered by SkinBrowser!
yrag2
Reply #10 Thursday, May 8, 2003 1:32 PM
You might try rebooting...after Post hit F8 and load last known good config. Not sure what you mean when you say nothing works, but give it a shot.

Powered by SkinBrowser!
yrag2
Reply #11 Thursday, May 8, 2003 1:34 PM
Sorry Static..didn't mean to step on ya...it's all yours

Powered by SkinBrowser!
sig101
Reply #12 Thursday, May 8, 2003 1:36 PM
Static, does system restore restore everything? I've never had occasion to use it so I'm wondering. For example, perhaps not relevant in this case, but if someone was working on something that was saved that day, if the restore point is the day before, then that data would be lost? Just wondering which is preferable depending on circumstances, restore or using safe mode (if the person can get into safe mode, that is).

Powered by SkinBrowser!
goodmorphing
Reply #13 Thursday, May 8, 2003 1:39 PM
My understanding is that it restores system settings to an earlier configuration and leaves data files that you have produced as they were.
citats
Reply #14 Thursday, May 8, 2003 1:39 PM
My experience is that sys restore does not affect the My Documents folder so if you created something new it would not change or should you have deleted something old it would still be gone. Sys restore does put back uninstalled progs tho.

Powered by SkinBrowser!
TODIE4
Reply #15 Thursday, May 8, 2003 1:41 PM
Well my cursor will not click on anything or will not load anything.
yrag2
Reply #16 Thursday, May 8, 2003 1:42 PM
Static is correct...it only affects proggies and their confir..

Powered by SkinBrowser!
goodmorphing
Reply #17 Thursday, May 8, 2003 1:42 PM
Do keyboard commands still work?
citats
Reply #18 Thursday, May 8, 2003 1:44 PM

as yrag says. reboot your notebook. after you see the white line start to cross the bottom of the screen as XP begins to initialize tap the F8 key then you will see an option to restore your computer to a previous configuration. You can also boot into safe mode the same route tap F8 then try the interactive approach and use the start menu to start a restore.

Powered by SkinBrowser!
sig101
Reply #19 Thursday, May 8, 2003 1:45 PM
Yeah, during the start up process you have to use the up down etc arrows on the keyboad and enter to select. Because your mouse drivers haven't yet been loaded (I figure). That's how one navigates if you get to the restore/safe mode screen.

Powered by SkinBrowser!
TODIE4
Reply #20 Thursday, May 8, 2003 1:56 PM
Keyboard commands do not work.

Please login to comment and/or vote for this skin.

Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:

  • Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
  • Access to a great community, with a massive database of many, many areas of interest.
  • Access to contests & subscription offers like exclusive emails.
  • It's simple, and FREE!



web-wc01