3d modeling, look what I found, this is amazing!!!!!
Sunday, February 23, 2003 by Styl-X Design | Discussion: WinCustomize Talk
I was just surfing about the internet, and look what I found, gosh, this is amazing!!
http://www.3dkingdom.org/modules.php?op=modload&name=My_eGallery&file=index&do=showpic&pid=694&orderby=dateD
no, this isn't a picture... wish I had this skills (but i am working on it!
)
http://www.3dkingdom.org/modules.php?op=modload&name=My_eGallery&file=index&do=showpic&pid=694&orderby=dateD
no, this isn't a picture... wish I had this skills (but i am working on it!
) |
|
Page 1 of 2 | |
|
|---|
White_Moth
Reply #4 Sunday, February 23, 2003 7:22 AM
Reply #4 Sunday, February 23, 2003 7:22 AM
I ran into this awhile back when I was hunting down free 3D progs, pretty cool. 
Styl-X Design
Reply #5 Sunday, February 23, 2003 7:24 AM
Reply #5 Sunday, February 23, 2003 7:24 AM
I think I got to move myself to that section to, en get of this 'abstract' crab, on a abstract wall you work 10 minutes, and 2 hour rendering, I was trying to make my watch, it isn't done yet, and am working now for 2 days on it, I will upload it when its ready. I think this kind of 3d moddeling is real art, but let me check dangeruss stuff. (I did seen his scorpion, that one is great!)
Jafo
Reply #6 Sunday, February 23, 2003 7:28 AM
Reply #6 Sunday, February 23, 2003 7:28 AM
Styl...
https://www.wincustomize.com/skins.asp?library=8&SkinID=5982
An older example of Russ's work. The original would be on his site...
https://www.wincustomize.com/skins.asp?library=8&SkinID=5982
An older example of Russ's work. The original would be on his site...
White_Moth
Reply #7 Sunday, February 23, 2003 7:37 AM
Reply #7 Sunday, February 23, 2003 7:37 AM
I was just thumbing through Catalyst magazine and drooling over Alias/Wavefront's Studio Tools 10 until I saw the price - $7,500.
Makes Rhino at $750 look pretty cheap.
Makes Rhino at $750 look pretty cheap.
Styl-X Design
Reply #8 Sunday, February 23, 2003 7:40 AM
Reply #8 Sunday, February 23, 2003 7:40 AM
Yeah, that look pretty good indeed,
only a waste of the motion blur
Gues I have a long road too go...
only a waste of the motion blur
Gues I have a long road too go...
White_Moth
Reply #9 Sunday, February 23, 2003 8:31 AM
Reply #9 Sunday, February 23, 2003 8:31 AM
I think Russ mentioned using tools like these mentioned above, in an interview I read somewhere, Lucky Dog 
One day, I will too.
And if you thought Jake's Lights were something to see, just wait, - maybe ten/fifteen years
One day, I will too.
And if you thought Jake's Lights were something to see, just wait, - maybe ten/fifteen years
White_Moth
Reply #10 Sunday, February 23, 2003 9:07 AM
Reply #10 Sunday, February 23, 2003 9:07 AM
Whoops 
Better make that Cadalyst Magazine at www.cadalyst.com
So anyway, as I was saying....
Better make that Cadalyst Magazine at www.cadalyst.com
So anyway, as I was saying....
IPlural
Reply #11 Sunday, February 23, 2003 12:30 PM
Reply #11 Sunday, February 23, 2003 12:30 PM
Styl, you should check out Pixologic.com http://pixologic.com/ web site and also Renderosity.com http://renderosity.com/
DangeRuss is, well, one of my graphics idols, I do not have many I look up to, a couple on this site, on a couple of other sites, and DangeRuss of course. but even those others do not hold the same level of awe and respect for me that DangeRuss does...
though, many many fantastic artists out there for sure...
I've a Frog on a leaf I am thinking of emailing to Frogboy, it's a 3D that someone did that looks as if it is ready to jump, and Amazonian Arrowhead Tree Frog, beautiful, and also another of a Turkish warrior who looks as if he is going to pull his sword and start hacking his way out of the monitor, or sick his 6000 lb Lizard on you
browse around those two sites and you will see some fantastic work. very good inspirational work and goal setting mantra for some
DangeRuss is, well,
one of my graphics idols, I do not have many I look up to, a couple on this site, on a couple of other sites, and DangeRuss of course. but even those others do not hold the same level of awe and respect for me that DangeRuss does...though, many many fantastic artists out there for sure...
I've a Frog on a leaf I am thinking of emailing to Frogboy, it's a 3D that someone did that looks as if it is ready to jump, and Amazonian Arrowhead Tree Frog, beautiful, and also another of a Turkish warrior who looks as if he is going to pull his sword and start hacking his way out of the monitor, or sick his 6000 lb Lizard on you
browse around those two sites and you will see some fantastic work. very good inspirational work and goal setting mantra for some
IPlural
Reply #12 Sunday, February 23, 2003 12:39 PM
Reply #12 Sunday, February 23, 2003 12:39 PM
I remember Cadalyst mag, I used to run a BBS called CADaddicts MCBCS and that was one of the most popular mags, that and Intergraphcis...
Started out with RBBS, move to PCBoard and then Maximus CBCS, ran Wildcat for a bit, but, I liked Maximus more, and was actually a hub for FIDO for a little while...
RocketPORT!! Digiboards, HST's and rollover lines... my wife pretty much hated me then
well not me, but my computer room and everything in it... that and meeting people from the board got old for her also, though I got to meat and make some fantastic friends with like interests in engineering, robotics and technologies...
geesh, that was starting in 1987 up to 1994...
anyway...
Started out with RBBS, move to PCBoard and then Maximus CBCS, ran Wildcat for a bit, but, I liked Maximus more, and was actually a hub for FIDO for a little while...
RocketPORT!! Digiboards, HST's and rollover lines... my wife pretty much hated me then
well not me, but my computer room and everything in it... that and meeting people from the board got old for her also, though I got to meat and make some fantastic friends with like interests in engineering, robotics and technologies...
geesh, that was starting in 1987 up to 1994...
anyway...
White_Moth
Reply #13 Sunday, February 23, 2003 12:46 PM
Reply #13 Sunday, February 23, 2003 12:46 PM
I can only dream for now...
But that is usually where I get started,
But that is usually where I get started,
IPlural
Reply #14 Sunday, February 23, 2003 1:14 PM
Reply #14 Sunday, February 23, 2003 1:14 PM
pre-Jafo proofing-mindslap dodging system initiated: red alert red alert!!! whoooop whoooop
meat=meet!
meat=meet!
Styl-X Design
Reply #15 Sunday, February 23, 2003 1:34 PM
Reply #15 Sunday, February 23, 2003 1:34 PM
Personaly I think 7500 is a little bit expensive for a 3d program... 2 bad santa dasn't exist...
IPlural
Reply #16 Sunday, February 23, 2003 2:17 PM
Reply #16 Sunday, February 23, 2003 2:17 PM
that depends on your needs I would think...
Catia and UniGraphics can cost well over $100,000 when you add on all the possible
additions to it....
for the home user looking to learn, Poswer, Bryce, and a number of other lower end lower priced programs are there, and they can produce quality 3D with skill learned over a period of time making use of them...
sooo
ZBrush @ 399.00 Euro, which is the same as the US$ pretty much is not to high a price for the program by far....
One of my fav's right up there with DangeRuss in my opinion, though DangeRuss is tops in my opinion...
Stevie-rae Townsend: http://209.132.69.82/showcase/getthumbs.shtml?0_Modeling&includeprefix=fury_&linkall
ZBrush is a extreamly fantastic 3D application which could very well call for double the price and still sell just as much as it does now. Yet they keep it in the upper low to lower medium price range because they are happy with the ROI in producing it and the community that has grown from it's use..
Catia and UniGraphics can cost well over $100,000 when you add on all the possible
additions to it....
for the home user looking to learn, Poswer, Bryce, and a number of other lower end lower priced programs are there, and they can produce quality 3D with skill learned over a period of time making use of them...
sooo
ZBrush @ 399.00 Euro, which is the same as the US$ pretty much is not to high a price for the program by far....
One of my fav's right up there with DangeRuss in my opinion, though DangeRuss is tops in my opinion...
Stevie-rae Townsend: http://209.132.69.82/showcase/getthumbs.shtml?0_Modeling&includeprefix=fury_&linkall
ZBrush is a extreamly fantastic 3D application which could very well call for double the price and still sell just as much as it does now. Yet they keep it in the upper low to lower medium price range because they are happy with the ROI in producing it and the community that has grown from it's use..
SuperheroCanadian
Reply #17 Sunday, February 23, 2003 2:44 PM
Reply #17 Sunday, February 23, 2003 2:44 PM
ive been trying to model a 66' mustang been workin on it forever...
IPlural
Reply #18 Sunday, February 23, 2003 2:51 PM sounds interesting SuperC !
nice wheels too...
have to share when it's finished, or now during the stages if your comfy with doing that
it gets to be a passion, then an obsession and then a trail and back to a passion, art is sooooooo invigorating !!
66 289 HO screamer, yeah
Reply #18 Sunday, February 23, 2003 2:51 PM
sounds interesting SuperC !nice wheels too...
have to share when it's finished, or now during the stages if your comfy with doing that
it gets to be a passion, then an obsession and then a trail and back to a passion, art is sooooooo invigorating !!
66 289 HO screamer, yeah
Weaksid
Reply #19 Sunday, February 23, 2003 3:12 PM
Reply #19 Sunday, February 23, 2003 3:12 PM
3ds/3d max and autocad will make those easy. Only if you know how to use them I'm working on getting to that level also. I got Autocad to design my inventions that I've designed but that's how far they got. I haven't gotten around to put them to computer or take them to development. I guess I'm a slacker. But once I start on autocad the things I plann on making on there will be amazing Swing!
I'm working on getting to that level also. I got Autocad to design my inventions that I've designed but that's how far they got. I haven't gotten around to put them to computer or take them to development. I guess I'm a slacker. But once I start on autocad the things I plann on making on there will be amazing Swing!
Styl-X Design
Reply #20 Sunday, February 23, 2003 3:57 PM
Reply #20 Sunday, February 23, 2003 3:57 PM
Here, this is my creation, first real 3d max work
http://www.geocities.com/shadownesss/watchjpg.jpg
the textures are not exactly what I want, and make sure you enlarge the picture, please tell me what you think about it.
http://www.geocities.com/shadownesss/watchjpg.jpg
the textures are not exactly what I want, and make sure you enlarge the picture, please tell me what you think about it.
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!
|
|
Page 1 of 2 | |
|
|---|
Reply #1 Sunday, February 23, 2003 7:15 AM