Stardock Introduces Acoustic Bridge

Thursday, March 22, 2012 by Island Dog | Discussion: WinCustomize News

Stardock is excited to announce a new application – Acoustic Bridge!  Acoustic Bridge lets PC users direct audio from one PC to the speakers of another.  Centralize the sound output from multiple PCs to a single PC. This enables you to transfer the audio notifications from any application, such as chat and mail programs or stock price alerts, from your desktop to your laptop.

Acoustic Bridge is in beta right now, and we have a special pre-order price of $7.95 which also gives you instant access to the beta.  A free 30-day trial is available also.

https://www.stardock.com/products/acousticbridge/

3-22-2012 1-28-13 PM

First Previous Page 1 of 3 Next Last
ZubaZ
Reply #1 Thursday, March 22, 2012 1:35 PM

I have a crappy laptop with crappy speakers.  With this, I can now conserve resources on my main box while streaming music from the laptop.  Now I can jam.   

VistArtXPosed
Reply #2 Thursday, March 22, 2012 3:01 PM

Will both PCs need an internet and/or network connection?  I only have a wireless N adapter on one PC, and nothing on the other. 

It would be nice if I could have sound output on my $400 Lenovo secondary-backup PC without wiring additional speakers (it's a backup PC, so it doesn't really need speakers, but it would be nice).

I installed the software on both PCs and I still can't share audio for either one.  Are speakers required on my Lenovo, or just a network connection?  I want my Lenovo to use the speakers on my HP HPE-400f (my primary PC which is also the primary audio source).

Island Dog
Reply #3 Thursday, March 22, 2012 3:03 PM

Network access will be required yes, that's how the data is being pushed.

 

ZubaZ
Reply #4 Thursday, March 22, 2012 3:07 PM

VistArtXPosed
Will both PCs need an internet and/or network connection?  I only have a wireless N adapter on one PC, and nothing on the other. 

It would be nice if I could have sound output on my $400 Lenovo secondary-backup PC without wiring additional speakers (it's a backup PC, so it doesn't really need speakers, but it would be nice).

I installed the software on both PCs and I still can't share audio for either one.  Are speakers required on my Lenovo, or just a network connection?  I want my Lenovo to use the speakers on my HP HPE-400f (my primary PC which is also the primary audio source).

You need to install Acoustic Bridge on both machines.  In the config select one to send and one to receive.  The sending PC will need to enter the code provided by the receiving (and playing) one.

Jafo
Reply #5 Thursday, March 22, 2012 8:44 PM

Sounds like fun.....

Get it? ....SOUNDS like fun......

Wizard1956
Reply #6 Thursday, March 22, 2012 9:12 PM

Sounds like fun.....

Get it? ....SOUNDS like fun......
We'll cross that bridge when we get to it.

Disturbedcomputer
Reply #7 Thursday, March 22, 2012 9:22 PM

well Will this work if one PC is let's say 50 miles away or do the PC's have to be in the same house?

 

aka use home PC which has Music and listen to the music on your office Pc

Neil Banfield
Reply #8 Friday, March 23, 2012 8:50 AM

Zubaz



Quoting Disturbedcomputer,
reply 7
will this work if one PC is let's say 50 miles away or do the PC's have to be in the same house? 

aka use home PC which has Music and listen to the music on your office Pc The computers need to be on the same network . . so unless you are doing something like VPN, no.

Well if the receiving end has a DNS entry and the right ports are open it should connect, though you would want to increase the buffer size.

Also this only sends sound, so you have no control over the remote machine.

Uvah
Reply #9 Friday, March 23, 2012 8:53 AM

Methinks apple air is gonna get smasheded

Disturbedcomputer
Reply #10 Friday, March 23, 2012 10:31 AM

Neil Banfield
Well if the receiving end has a DNS entry and the right ports are open it should connect, though you would want to increase the buffer size.

Also this only sends sound, so you have no control over the remote machine.

 

oh ok thanks  nice catch on well Will 

 

ev4debug
Reply #11 Wednesday, March 28, 2012 5:10 AM

there is a way to make it work on windows xp?

Neil Banfield
Reply #12 Wednesday, March 28, 2012 5:16 AM

ev4debug
there is a way to make it work on windows xp?

No.  Windows XP is not supported by this application.

RedneckDude
Reply #13 Wednesday, March 28, 2012 1:33 PM

This Rocks!!!!!!        Pun intended.....

RedneckDude
Reply #14 Wednesday, March 28, 2012 2:31 PM

OK, unless I'm completely stupid, shut up Yrag, there's no way to turn it off. Other than task manager, of course.

ZubaZ
Reply #15 Wednesday, March 28, 2012 3:10 PM

RedneckDude
OK, unless I'm completely stupid, shut up Yrag, there's no way to turn it off. Other than task manager, of course.
The best way currently is to mute it in the mixer settings on the receiving PC.

You can also stop the sendign PC from sending by right-clicking on the systray icon and choosing "Send audio when receiver is online"

 

RedneckDude
Reply #16 Wednesday, March 28, 2012 3:44 PM

I didn't say mute. I said you can't turn it off, as in not have it running in systray. I now have a service running on two machines that I'm not using. There should be a way to turn it off and on.  

Neil Banfield
Reply #17 Wednesday, March 28, 2012 3:53 PM

You can stop the service and set it to manual if you wish and then when you want it just start the service.

Stopping the service will disable it, though you should be aware that no setting changes will be saved if the service is not running and you open the config UI.

RedneckDude
Reply #18 Wednesday, March 28, 2012 4:05 PM

So you're saying stop it in services, set to manual,run it when you want, then turn it off via task manager every time I use it? Or reboot? Seems a tad much.

 

Can I assume that a future build will have a on/off switch? If not, thanks for the trial, I'm probably not a buyer.

 

I know it seems simple, but why not right click/exit?

Neil Banfield
Reply #19 Wednesday, March 28, 2012 4:10 PM

RedneckDude
So you're saying stop it in services, set to manual,run it when you want, then turn it off via task manager every time I use it? Or reboot? Seems a tad much.

 

Can I assume that a future build will have a on/off switch? If not, thanks for the trial, I'm probably not a buyer.

You do not need to involve taskmanager at all.

Once the service is set to manual it will not start unless you want it.  Start the service to start it running, stop the service to stop it running.  On stop it automatically closes all the processes and on start it starts all the processes.

From a command prompt "net stop acousticbridge" stops it and "net start acousticbridge" would start it, though it needs admin rights.

Neil Banfield
Reply #20 Wednesday, March 28, 2012 4:17 PM

BTW what issue do you have with the service and child process running all the time? 

They are not using much memory when doing nothing or any cpu.

WindowBlinds, WindowFX etc all work in the very same way.  A service and a process running.

Please login to comment and/or vote for this skin.

Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:

  • Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
  • Access to a great community, with a massive database of many, many areas of interest.
  • Access to contests & subscription offers like exclusive emails.
  • It's simple, and FREE!



web-wc01