Impulsively Tired

all I was was to be animated

Sunday, November 2, 2008 by Bichur | Discussion: Stardock Support General

So....

I made (or.. apparently tried to make) a post last night on the Impulse Forums.... can't find it anywhere.

I don't know if it's because:

 

1) the forums have been going 'BOOM' quite a bit this weekend (at least for me).

or

2) TrendMicro doesn't like IMPULSEivness:

 

 

Going to the Impulse forums using Impulse or any browser... I'm bombarded with warnings...

 

I had read for the animations on the Halloween skin I needed 6.30.100

SDC shows I have 6.30.099 with no update available

Impulse shows I have 6.30.099 with no update available

Impulse's Dock says there's an update - which is not available using the dock apparently

 

The question(s) I had posted included:

 

1) what version of netframework is needed for Impulse? Currently I have NFW 1.1 & 2.0... but I don't know if I need 3.0 or 3.5 & whether it can be installed alongside the other 2 or does one, the other or both need to be removed.

2) how can you tell if Impulse is updating itself with no status bar?

3) why does Impulse keep popping out a message telling me it's decided to work offline since it can't connect to the servers, yet I can use Impulse to go to the forums, chat, etc (at least chat doesn't give me warnings)

4) why does Impulse always say I'm not logged in?

5) how can I get it to log in?  I tried to manually log in using the change my log in procedures but it can't connect to the servers

6) I have earthlink dialup w/accelerator - TrendMicro 2007 w/firewall - proxy is set to localhost 8080 which seems to work on everything else (SDC included)

7) will WB6.30.100 ever be available on SDC?  I have no probs with SDC - it opens and IDs updates within a minute

 

 

I'm willing to work with Impulse, but dammit Capn uh dunna think uh ken hold er

 

 

 

 

First Previous Page 5 of 5 Next Last
ImStein
Reply #81 Wednesday, November 5, 2008 1:12 AM

Reply #75

 

 

You tell good stories.....tell me another........please?

Bichur
Reply #82 Wednesday, November 5, 2008 1:27 AM

You tell good stories.....tell me another........please?

 

after this one is over....

 

so I looked over the secret support instruction...

part of which was to go into C:\Program Files\Stardock\Impulse

and rename an exe to exe.bak and insert this other file.

so I open My Computer

cancelcancel

open C:\

open Program Files

open Stardock

 

what the?

 

Impulse(2)

and there ain't nothing in there but a bunch of folders with (2) at ends of the names - no exes

 

 

I think I hear System Restore snickering....

 

 

 

Hey TaskManager!!!

 

 

 

 

 

BigDogBigFeet
Reply #83 Wednesday, November 5, 2008 9:20 AM

crap. forgot i put in a ticket.... I'll go check...

Sorry though for all the work you have ahead for you.

Well good luck there Bichur.

Bichur
Reply #84 Wednesday, November 5, 2008 4:58 PM

Now I'm wondering.....

If I restore back to before I 1st restoreed and Impulse still shows no exes inside - I can just delete the folder, clean up the reg, reboot and reinstall the full verion, right?  other wise it get a clean reinstall.

Got no hopes the ELTotalAcces will come back as it was, so that will be unistalled until I get a good one to install.

and yes Duck, it's a neccesity when browsing pro umm... intensively graphic laden sites such as various gallery here a WC.

Bichur
Reply #85 Sunday, November 9, 2008 8:45 PM

BigDogBigFeet
Have you tried contacting your AV software company yet and asking them why their product has these issues?

It sounds like your AV setup is blocking Impulse.

To the best of my knowledge you need the Net Framework through 2.0 and all updates.  Net 3.0 and 3.5 aren't needed.

 

You may have been on to something there BDBF

Went to Giveawayoftheday today and TMicro blocked it a a file exchange service

Didn't block gamegiveaway though

 

I had turned on website filtering last month when I followed a google link looking for some psp and paint.net plugins - clicked on link and TMicro stopped a virus or trojan from loading from that page

 

Now I wonder if the log/update part of Impulse was tagged as needing web site blockage?

 

Once my ELink disk comes in and I get all set as it was... gonna have to test that out...

Bichur
Reply #86 Thursday, May 7, 2009 9:43 PM

well, that didn't work....


so I reformatted in Jan.

still couldn't use impulse.

all posts and skin comments section had no comment/reply box except maybe once out of 70 pages looked at

wife couldn't get her necessary school stuff to load - 10 mile trip to the nearest wifi...

 

dialup suxored....

vStyler
Reply #87 Thursday, May 7, 2009 9:56 PM

You and yrag both deserve Karma for this one for sure.

 

bestowed

Bichur
Reply #88 Thursday, May 7, 2009 10:29 PM

on the good foot:

 

been using an HP F50 15" (and that would be diagonal) monitor - Monday picked up an Acer 19" widescreen for $89 = I can now use IRB's skins!!  whoohoo

 

basic dsl finally became available in my area (my road is at the end of the line so I got lucky) - got it hooked up Tues after work.. even set it up with a wireless gateway so the wife can get connected from whatever room she's in

 

double whoohoo

 

still having slight issues with Impulse whn it loads up I get "problem retrieving update data" in the bottom left corner - if I let it sit for 10 min or so it starts working..

Fuzzy Logic
Reply #89 Thursday, May 7, 2009 10:31 PM

still having slight issues with Impulse whn it loads up I get "problem retrieving update data" in the bottom left corner - if I let it sit for 10 min or so it starts working..

It's working normally then

Bichur
Reply #90 Thursday, May 7, 2009 10:49 PM

It's working normally then

 

glad to know it's not me..

Bichur
Reply #91 Thursday, May 7, 2009 10:49 PM

and post again

Bichur
Reply #92 Thursday, May 7, 2009 10:49 PM

much better than dialup

Wizard1956
Reply #93 Thursday, May 7, 2009 10:50 PM

Having just connected my brother up to dial-up I now know what you have been going through.The Pony Express transferred data faster. And with less horses**t involved at that. Congrats on getting a better connection.

I had DSL Lite in SC and while it wasn't nearly as fast as the cable service I have now,it was reliable for the most part and no waiting to connect. Too bad my bro can't get DSL or cable,but it's unavailable where he lives.

Bichur
Reply #94 Thursday, May 7, 2009 10:58 PM

Thanks Wiz... been putting with it since 2003

SP2 full version - download and save - 33+ hrs

 

and I find it somewhat irritating and sad that so many people live in some imaginary world where broadband is a given everywhere... anytime someone has an issue due to dialup and downloads they all jump in shouting get a better connection...

 

just noticed... Impulse at this post says me karma is 117, at WC it's 120, at SDC its 66

 

 

Bichur
Reply #95 Thursday, May 7, 2009 11:01 PM

yet copying the link to me karma while within impulse (showing 117) is the link to me karma at WC (showing 120)

 

 

edit - and apparently if a page is fully loaded, you get extra stuff like edit button - too cool

Bichur
Reply #96 Thursday, May 7, 2009 11:03 PM

Impulse needs tabs and a refresh button

Bichur
Reply #97 Thursday, May 7, 2009 11:08 PM

and impulse is showing 96 reply while according to FF this on I'm typing is the 96th

 

 

and the ole kick in the ass gets it going....

vStyler
Reply #98 Friday, May 8, 2009 12:18 AM

double whoohoo

 

Good for you

Please login to comment and/or vote for this skin.

Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:

  • Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
  • Access to a great community, with a massive database of many, many areas of interest.
  • Access to contests & subscription offers like exclusive emails.
  • It's simple, and FREE!



web-wc01