Internal Temperatures...

Monday, June 9, 2008 by RPGFX | Discussion: Personal Computing

ok, I use speedfan to monitor my computer's internal temperatures.  However I have no idea what is good or bad... could someone give me an idea of what kind of temperatures I should be running.  What levels are dangerous to my computer...

Thanks!
Piznit
Reply #1 Monday, June 9, 2008 1:56 PM
If it reaches 451 degrees Fahrenheit, that is bad.

But I think it depends on what your running. I would guess a good general temp. to shoot for would be no higher than around 75 degrees Celcius, maximum load. I have heard of others that can run upwards of 90, which sounds crazy to me.
ZubaZ
Reply #2 Monday, June 9, 2008 2:11 PM
Your motherboard, cpu etc should have a min/max spec somewhere.
Zydor
Reply #3 Monday, June 9, 2008 2:41 PM
Modern motherboards have a built in thermal cut out/regulator that either closes down the cpu or drastically throttles it until the temperature reaches manageable levels in the event temperatures reach dangerous levels.

It should not be relied upon as a routine measure as long term issues can still occur (shortening Board life), but it is an effective "measure of last resort". Its enough to keep you on the good side of life until you track down the specific setting for your motherboard.

Best place for the latter is the motherboard manufacturers WebSite, as it does vary hugely between manufacturers.

Regards
Zy
RPGFX
Reply #4 Monday, June 9, 2008 2:52 PM
Thanks for the help guys.

no higher than around 75 degrees Celcius, maximum load


Mine generally runs around 50-60 Celsius.. so hopefully that's not bad.
RPGFX
Reply #5 Monday, June 9, 2008 2:55 PM
If it reaches 451 degrees Fahrenheit, that is bad


Yeah, I'd say that would be bad for my entire office... as it would probably burst into flames...
RPGFX
Reply #6 Monday, June 9, 2008 2:55 PM
Your motherboard, cpu etc should have a min/max spec somewhere.


any idea at all where this information could be found?
Moosetek13
Reply #7 Monday, June 9, 2008 3:07 PM
Looking for mb specs won't help all that much.

You need to find the temp specs for each major component, like the specific CPU and video card.


And I agree with Piznit, CPU temps should be in the 60-75C range at max load. Although 75C is really getting a bit toasty, as far as I'm concerned.
When I first started playing GalCiv2 my CPU temps were reaching ~72C, which had me a bit worried.
After installing a Zalman CPU fan the temps don't usually get above 62C.

Video cards are another matter. Hitting 90C when pushing a video card is no big deal. They can usually go to 110C or a bit more before they start to fry.

As always, when in doubt, add more fans or upgrade the current ones.
ZubaZ
Reply #8 Monday, June 9, 2008 3:11 PM
Motherboard/cpu vendor website?

For example:
My CPU:  http://processorfinder.intel.com/details.aspx?sSpec=SL6WJ#
RPGFX
Reply #9 Monday, June 9, 2008 6:00 PM
thanks again everyone. You've all been very helpful!

Please login to comment and/or vote for this skin.

Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:

  • Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
  • Access to a great community, with a massive database of many, many areas of interest.
  • Access to contests & subscription offers like exclusive emails.
  • It's simple, and FREE!



web-wc01