I created a new dock ...
but the spacers are acting oddly
Friday, March 28, 2008 by RickyMaveety | Discussion: Docks
Now, this may only be true on my screen because of the configuration, but I thought I'd ask and see if anyone had seen this before. I've got four screens, and I'm seeing some odd behavior.
I just made a new dock ... works on all sides of the screen just fine. The spacers are another issue altogether, however. The top and bottom screen spacers work great. The right and left spacers work properly, but only on the main screen. If I try to add a spacer to a side dock on any other screen, while the dock shows up on the correct screen ... the spacer, and ONLY the spacer, shows up on the main screen ... whether there is a dock there or not.
So, if I add a side dock to screen 3 ... dock and icons are all on screen 3 and working great. But on screen 2 (my main screen) the spacers are just stuck to the sides of that screen ... and there is no dock there.
The odd thing is that I based this dock on the same ini file as my steel dock, and the spacers behave quite normally for all configurations with that dock (at least as far as I can tell).
So ... I'm a teensy bit confused. Has anyone ever run across this??
Ricky
Reply #22 Monday, March 31, 2008 6:25 PM
I can answer this one...the jpg file SIZE it to big...bring the actual mb down a bit and try again. I had this exact same thing happen and that was the fix.
Reply #23 Monday, March 31, 2008 6:44 PM
In addition, all six times that I uploaded (including the last one which actually worked), it was the exact same jpg preview file.
Nice suggestion, however. But ... in this case, something else was the problem and I will probably never know exactly what it was.
Reply #24 Monday, March 31, 2008 7:32 PM
Reply #25 Tuesday, April 1, 2008 12:45 PM
I don't see that it's somehow not tactful of me to state the truth, your suggestion, however well intentioned didn't happen to be correct. Get over it.
Reply #26 Tuesday, April 1, 2008 12:49 PM
It's often best to assume the best.
Reply #30 Tuesday, April 1, 2008 3:03 PM
There is nothing worse than trying to upload a rather small - and very complressed - jpg, and having the system tell you (over and over) that it is not a jpg. Long about the fourth time, one can find ones self screaming obscenities at the computer screen. Which does no good at all.
Combine that with having to (1) repair the garbage disposal, (2) change out several electrical outlets, (3) clean up more cat crap than most people see in a year, and (4) clean up all the storm damage around the house ... and one failed upload can send me over the edge.
Eeesh.
Reply #31 Tuesday, April 1, 2008 3:10 PM
Reply #32 Tuesday, April 1, 2008 3:10 PM
ah, yes...20 cats.
Reply #33 Tuesday, April 1, 2008 3:13 PM
I agree. When it happened to me, I was screaming at the pc (how dumb is that) that IT IS A FREAKING JPG!
Reply #35 Tuesday, April 1, 2008 6:37 PM
Nope. I'm a Buddhist. Not allowed. Besides, they are almost all either (1) elderly or (2) handicapped in some way ... so it wouldn't be a fair fight.
Reply #36 Thursday, April 3, 2008 12:23 PM
And, having now read the guidelines, it seems a little odd to specifically say that no Bryce postings are allowed unless you can't tell they were done in Bryce. Wouldn't the same have to be true of Cinema 4D or any other 3D rendering application?? If somehow you can tell it was rendered in that application??
I really think someone needs to reconsider the wording of that guideline. I use Bryce a lot, and I sometimes use textures that are peculiar to Bryce. If I see that texture in another wallpaper, I can pretty much tell it was rendered in Bryce. So, I would assume that would mean that the image, no matter how good it is, would be in violation of the guidelines ... since, after all, I can tell it was done with Bryce by just looking at it.
Now, I'm an attorney, so I tend to read things a little differently than most people, but with guidelines such as these, I do think they should say what they mean ... and mean what they say. The brown metal texture I used in Post Apocolyptic Kitty is a dead give away that it was done in Bryce.
Let me quote:
A few examples of what will never get through moderation:
- Britney Spears or other celebrity wallpapers (see note about copyright above)
- Bryce art, unless the result is so astonishing that one could never tell it was done in Bryce.
- Dolphins, palm trees, metal spheres or other over-used elements
- XP-related walls, unless really innovative/original.
- Copyrighted photos/images
- Confused composition...e.g....3D artwork with conflicting light-sources belying the form.
- A ground-swell of negativity from a significant number of admins.
OK .... so Post Apocolyptic Kitty is Bryce art. I like it, but it is in no way "astonishing." I think it is at least as good as other stuff I've seen in the main gallery, but anyone familiar with Bryce would look at that one texture and say "Oh, you used the Copper Bump" there .... nice." Same thing is true of my Steel Dock icons ... any Brycer could probably spot that they were rendered in Bryce.
So, I guess really that the moderators should pull all of my artwork out of the main gallery and just leave it on my personal gallery. Sort of sucks that one particular artist's tool should be singled out as being something that "will never get through moderation."
But, hey, I've been Brycing for .... well, for a long time ... and I'm not about to give up the tool just because the moderators have a bias against it. So ... I suppose you'll need to remove what I've posted so far, and I'll just post to my personal page in the future. Can I assume that they will allow me to post my Bryce renders there? Hope hope.
Reply #37 Thursday, April 3, 2008 12:30 PM
Reply #38 Thursday, April 3, 2008 1:51 PM
Personally, I think the bias stems from the fact that it's (1) inexpensive and (2) easy to use, which means that it is easy for people with zero talent to create pure crap in 3D with little or no effort.
Having said that, I still think someone should take a few seconds and rewrite those "guidelines" so that they aren't bashing those of us who put some time and effort into our submissions (even if we -- well, I -- still come under the zero talent category).
Also .... as long as I have your attention ... even though this has less than nothing to do with docks and more to do with wallpapers ... I made some multiscreen versions of PAK (the abbreviation I will use forevermore because I am dog tired of typing "Post Apocolyptic Kitty") wallpaper. Am I correct in assuming that a wall like that 5120x1024 would be too big to submit? If so, do I just post it to one of my outside sites and link to it in the comments for PAK??
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!







Reply #21 Monday, March 31, 2008 6:24 PM
So, we'll see how it goes this time around. Snicker ... now I love this dock. I think it's the best one (out of two) I've made so far. So, what do you want to bet this one ends up being rejected for the main gallery??
Eh ... it's all good either way. No one seems to like the poor little PA kitty anyway. However, since I love the little bugger I'm making a whole skin for him (starting with a Rainlendar).