I created a new dock ...
but the spacers are acting oddly
Friday, March 28, 2008 by RickyMaveety | Discussion: Docks
Now, this may only be true on my screen because of the configuration, but I thought I'd ask and see if anyone had seen this before. I've got four screens, and I'm seeing some odd behavior.
I just made a new dock ... works on all sides of the screen just fine. The spacers are another issue altogether, however. The top and bottom screen spacers work great. The right and left spacers work properly, but only on the main screen. If I try to add a spacer to a side dock on any other screen, while the dock shows up on the correct screen ... the spacer, and ONLY the spacer, shows up on the main screen ... whether there is a dock there or not.
So, if I add a side dock to screen 3 ... dock and icons are all on screen 3 and working great. But on screen 2 (my main screen) the spacers are just stuck to the sides of that screen ... and there is no dock there.
The odd thing is that I based this dock on the same ini file as my steel dock, and the spacers behave quite normally for all configurations with that dock (at least as far as I can tell).
So ... I'm a teensy bit confused. Has anyone ever run across this??
Ricky
Reply #2 Sunday, March 30, 2008 8:55 PM
Well, you asked if anyone has ever run across this...and apparently, by the lack of response, no one had. Should we answer the post "No", therefore, wasting space and not really helping or just leave it for someone who has had the problem? Not trying to be an ass, but your tone came off rather stiff with the "Since no one bothered to answer..."
Reply #3 Sunday, March 30, 2008 10:14 PM
Reply #4 Monday, March 31, 2008 11:48 AM
The question I posed ... whether anyone had ever heard of this ... was, after all, a yes or no answer. I really doubt that a simple "no" would have taken up that much space or more than about 4 seconds of anyone's time.
And, since I have 20 cats myself, I probably wouldn't have minded reading about the 14 year old bobtail cat named Princess either.
My tone was exactly what I intended it to be. No one did bother to answer the post ... not even to say "no ... that's strange." Not every question requires a completely technical solve the problem sort of answer. Sometimes a simple WTF will suffice.
Reply #5 Monday, March 31, 2008 12:10 PM
You could also change the forum category.
Reply #6 Monday, March 31, 2008 12:20 PM
Reply #7 Monday, March 31, 2008 12:27 PM
And why not the post title? Look in the forums, only the first line appears. It doesn't show that you are looking for some help. You don't see the second line until you actually open the post. Just a thought.
Reply #8 Monday, March 31, 2008 12:41 PM
Reply #9 Monday, March 31, 2008 12:52 PM
Reply #10 Monday, March 31, 2008 12:54 PM
Me? I might respond just to bump it up to the top of the forums; especially if it's posted on the weekend. Otherwise . . I think it's better not to post "nothing".
As for the title you chose . . it looked like an advert for a dock and I only read it because messiah, josh and philly were involved and the post count was going up.
Accepting good advice graciously from folks is a good thing.
Reply #11 Monday, March 31, 2008 3:55 PM
I absolutely think posting something ... anything ... even "I just got a new cat" ... is better than complete and total silence. The only conclusion I could draw from that was that the post was not worthy of a comment.
For the record .... I don't personally give a hoot if someone sticks there nose in and contributes nothing. At least they stuck their nose in, so I know at least someone read the post.
Philly, thank you for the suggestion about making the post title more complete and not depending on the subtitle to get an idea across.
Killajosh, thank you for the WTF. Doesn't matter to me if you make docks or not, for a question like this, any input is welcome.
And .... I certainly understand about not posting on the weekends. I doubt I will do that anymore. I wanted to skin my other computers, so I posted to Stardock about whether I needed to purchase additional Object Dock and Object Desktop programs to do that. And ..... Sunday night (having not gotten an answer and really wanting to start on the project) I went ahead and purchased another set.
So, naturally, today I get an email telling me that I didn't need to do that. Go figure. And, yes, they are giving me a refund .... but not being able to communicate with anyone for two days every week certainly is a pain in the rear.
Hey, but as long as I'm bitching .... how long does it usually take for them to approve a dock?? Even if it's just to relegate it to your personal page?? I posted my AK dock at the same time as I posted the AK icons. The icons went into the main gallery immediately, but the dock is still languishing somewhere. Granted, I made it to go with my Post Apocolyptic Kitty wallpaper (which no one but me particularly likes -- and what the hell, I'm going to do a full pack of it anyway, so there), but still it seems odd to have one item go up right away and the other not for several days.
Comments??
Reply #12 Monday, March 31, 2008 4:02 PM
Reply #13 Monday, March 31, 2008 4:31 PM
In regards to your dock icons; different moderators manage different queues so the dock moderator may not have been around. Or, as Philly said, the queue was backed up. Or, there was a problem or question with your docks and a second moderator opinion is required but . . . the AK dock icons are live and have been since 3/29/08. (https://www.wincustomize.com/skins.aspx?libid=29&search=ak)
Reply #14 Monday, March 31, 2008 4:35 PM
Reply #15 Monday, March 31, 2008 5:03 PM
You've got four screens?....we used to dream of having one....just so as we could see what was happening when we moved the mouse......
sorry.....wrong thread......
Reply #16 Monday, March 31, 2008 5:04 PM
Reply #17 Monday, March 31, 2008 5:10 PM
Yes, four screens. It's just that I used to have homes in two states (California and Texas). When I moved everything to Texas, I suddenly had extra screens so, I decided to hook them all up to the one computer (and use the second computer for spare parts).
I think in future posts, I will make my own personal policy regarding replies evident. Espcially when the technical expertise of the answer is not an issue.
And, I think I will trundle my butt over to the Support forum and post the issue with the side spacers. It is an odd bug after all.
Reply #18 Monday, March 31, 2008 5:43 PM
Reply #19 Monday, March 31, 2008 6:13 PM
So, for now, I think I'll just give up. It's a nice dock, but five tries is my limit for any one day.
Reply #20 Monday, March 31, 2008 6:16 PM
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!







Reply #1 Sunday, March 30, 2008 8:00 PM
No matter which dock I use, if it has a visible spacer, then the side dock spacers all show up on the primary monitor rather than the one on which the dock is located. I guess it's just a bug in the program.
So, I'm making due by not using any spacers on any of the side docks.