Windowblinds and Wallpaper Changing
Wednesday, October 11, 2006 by wscwebyoda | Discussion: WindowBlinds
Hello friends...
I wrote a message over a month ago about the wallpaper changer feature not working in Windowblinds. Well, it still does not appear to be working in the latest build of WB. The only option that does work is the change at login... but, it does not work on the hourly option. Does anybody have any ideas? Thanks for the help!
Listed below is the system info from WB:
WindowBlinds 5.1 System Information Report:
STATUS : WB+ SRV+ HLP+ UI+ TRAY+
WindowBlinds is installed correctly on this PC.
WindowBlinds appears to be activated on this PC
Your machine supports per pixel borders on WindowBlinds skins.
You have one monitor in total.
(Default Monitor) 1 is attached to NVIDIA GeForce4 440 Go 64M
Wblind.dll 2006/10/09 10:24:20
Wblind64.dll 2006/10/09 11:51:37
Wbsrv.dll 2006/10/09 10:40:18
Wbconfig.exe 2006/10/10 16:39:13
Wbload.exe 2006/03/13 17:54:14
Wbhelp.dll 2004/09/18 16:37:07
Wbui.dll 2005/12/06 21:29:06
Tray.dll 2006/04/13 17:29:23
I wrote a message over a month ago about the wallpaper changer feature not working in Windowblinds. Well, it still does not appear to be working in the latest build of WB. The only option that does work is the change at login... but, it does not work on the hourly option. Does anybody have any ideas? Thanks for the help!
Listed below is the system info from WB:
WindowBlinds 5.1 System Information Report:
STATUS : WB+ SRV+ HLP+ UI+ TRAY+
WindowBlinds is installed correctly on this PC.
WindowBlinds appears to be activated on this PC
Your machine supports per pixel borders on WindowBlinds skins.
You have one monitor in total.
(Default Monitor) 1 is attached to NVIDIA GeForce4 440 Go 64M
Wblind.dll 2006/10/09 10:24:20
Wblind64.dll 2006/10/09 11:51:37
Wbsrv.dll 2006/10/09 10:40:18
Wbconfig.exe 2006/10/10 16:39:13
Wbload.exe 2006/03/13 17:54:14
Wbhelp.dll 2004/09/18 16:37:07
Wbui.dll 2005/12/06 21:29:06
Tray.dll 2006/04/13 17:29:23
 |
|
Page 1 of 2 | |
|
|---|
Bichur
Reply #2 Thursday, October 12, 2006 1:20 AM
Reply #2 Thursday, October 12, 2006 1:20 AM
It didn't work, but then again I also updated WB after I checked the option.
wscwebyoda
Reply #3 Thursday, October 12, 2006 7:13 PM
Reply #3 Thursday, October 12, 2006 7:13 PM
Hmmm... still no answer... just like the last time I posted this issue. I was hoping someone on here could give me an answer because I've not received any help when requesting help from Stardock. Oh well, not a huge issue. But, I would love to have had it working. 
Bichur
Reply #4 Thursday, October 12, 2006 8:10 PM
Reply #4 Thursday, October 12, 2006 8:10 PM
do you have use wall supplied checked or unchecked?
is the wall you are using one of the ones you selected for the change?
just curious, I noticed: I had selected 4 walls to rotate on the hour - then I decided to update WB - by the time I updated and rebooted, my 1st hour had passed... but on the reboot I saw one of the walls I had selected when it was loading, then it went back to the wall I had up originally (not one of the four and not in WB list).
I was using a jpg, and I've noticed sometimes my walls hang or don't change when using Natural Desktop and I have to manually go in and apply the skin ND says should be showing to get it to start ND's cycling. Didn't get a chance last night (and not at home yet) to apply one of the walls I selected for WB to cycle and then see if it will.
is the wall you are using one of the ones you selected for the change?
just curious, I noticed: I had selected 4 walls to rotate on the hour - then I decided to update WB - by the time I updated and rebooted, my 1st hour had passed... but on the reboot I saw one of the walls I had selected when it was loading, then it went back to the wall I had up originally (not one of the four and not in WB list).
I was using a jpg, and I've noticed sometimes my walls hang or don't change when using Natural Desktop and I have to manually go in and apply the skin ND says should be showing to get it to start ND's cycling. Didn't get a chance last night (and not at home yet) to apply one of the walls I selected for WB to cycle and then see if it will.
wscwebyoda
Reply #5 Thursday, October 12, 2006 10:16 PM
Reply #5 Thursday, October 12, 2006 10:16 PM
I do not have the wallpaper supplied with blind checked. Should I? Haven't tried that option because I do not want to use the wallpaper supplied with most blinds.
Hankers
Reply #6 Thursday, October 12, 2006 10:22 PM
If you have a problem with an application feature your best bet is to contact [email protected] to get an "official" response.
Reply #6 Thursday, October 12, 2006 10:22 PM
| Hmmm... still no answer... just like the last time I posted this issue. |
If you have a problem with an application feature your best bet is to contact [email protected] to get an "official" response.
Bichur
Reply #7 Friday, October 13, 2006 12:05 AM
Beats me.
got home.
trying again.
set a pic from the first wall option in WB config - checked that I still have 4 for cycle
right clicked desktop and checked properties - wall selected was shown as ownerwall2 instead of wall name - went into WB wall folder and selected from there (one that was in my list of 4) - name showed in properties correctly
changer set to cycle in sequence (never know, random could make it pick the same wall everytime)
just notice the wall showing now, is the 2nd in sequence - too close to an hour to change. what if it changes to the 2nd in the sequence which is the wall now showing? how will I know?
hey Hankers.
On wscwebyoda's other post, Neil popped in and asked some particulars but never came back
Reply #7 Friday, October 13, 2006 12:05 AM
| I do not have the wallpaper supplied with blind checked. Should I? |
Beats me.
got home.
trying again.
set a pic from the first wall option in WB config - checked that I still have 4 for cycle
right clicked desktop and checked properties - wall selected was shown as ownerwall2 instead of wall name - went into WB wall folder and selected from there (one that was in my list of 4) - name showed in properties correctly
changer set to cycle in sequence (never know, random could make it pick the same wall everytime)
just notice the wall showing now, is the 2nd in sequence - too close to an hour to change. what if it changes to the 2nd in the sequence which is the wall now showing? how will I know?
hey Hankers.
On wscwebyoda's other post, Neil popped in and asked some particulars but never came back
Bichur
Reply #8 Friday, October 13, 2006 12:09 AM
Logic tells me that would override the change function
Reply #8 Friday, October 13, 2006 12:09 AM
| I do not have the wallpaper supplied with blind checked. Should I? |
Logic tells me that would override the change function
Bichur
Reply #9 Friday, October 13, 2006 12:18 AM
Reply #9 Friday, October 13, 2006 12:18 AM
I don't think it's working for me either... so I bumped the other post. 
wscwebyoda
Reply #11 Friday, October 13, 2006 5:18 PM
Reply #11 Friday, October 13, 2006 5:18 PM
Bichur and all... so far, I've tried every possible option to get the wallpaper changer to work and still nothing. The only time that it works is when I'm logging into the computer... the wall change then... even though I have it set to change every hour.
By the way, for the person that suggested earlier to contact stardock support... I already have and have not received a response. Not to the request that I sent in September nor the one from this week.
By the way, for the person that suggested earlier to contact stardock support... I already have and have not received a response. Not to the request that I sent in September nor the one from this week.
ZubaZ
Reply #12 Friday, October 13, 2006 5:46 PM
Go to https://www.stardock.helpserve.com
If a case was created for you (which happens automatically when you send email) you should see it here and be able to update it.
If you did not get a automatic response to your original email, the email monsters ate it. Create a new case at the address above and it will be reviewed.
Reply #12 Friday, October 13, 2006 5:46 PM
| already have and have not received a response. Not to the request that I sent in September nor the one from this week. |
Go to https://www.stardock.helpserve.com
If a case was created for you (which happens automatically when you send email) you should see it here and be able to update it.
If you did not get a automatic response to your original email, the email monsters ate it. Create a new case at the address above and it will be reviewed.
Bichur
Reply #13 Friday, October 13, 2006 6:02 PM
Reply #13 Friday, October 13, 2006 6:02 PM
I keep getting a flash of one of the walls selected when I log in, but then it reverts back to what I had.
Was trying 'no wall' to start then see if it changed, this morning, but I had to go to work.
Haven't tried picking some walls, then double clicking one of those to see if it will apply from that section.
No retreat.
No surrender.
Was trying 'no wall' to start then see if it changed, this morning, but I had to go to work.
Haven't tried picking some walls, then double clicking one of those to see if it will apply from that section.
No retreat.
No surrender.
wscwebyoda
Reply #14 Sunday, October 15, 2006 11:37 AM
Reply #14 Sunday, October 15, 2006 11:37 AM
Hmmmm... still no response to my requests. Someone said that maybe it had to do with Friday the 13th... don't think so! 
Instead, it is something that continues to make me mad. I've reported the issue multiple times and in multiple ways... yet, no answers like all the other questions I've asked from support in the past. Guess its time not to renew my ObjectDesktop subscription.
Has anybody had any luck with getting the hourly wallpaper change feature to work? Or, is everyone else having the same issue?
Instead, it is something that continues to make me mad. I've reported the issue multiple times and in multiple ways... yet, no answers like all the other questions I've asked from support in the past. Guess its time not to renew my ObjectDesktop subscription.Has anybody had any luck with getting the hourly wallpaper change feature to work? Or, is everyone else having the same issue?
Neil Banfield
Reply #15 Sunday, October 15, 2006 12:01 PM
Reply #15 Sunday, October 15, 2006 12:01 PM
We are currently looking into why this appears to be happening and once we find out why we will update 5.1.
Can you confirm that every other wallpaper change option works for you?
wscwebyoda
Reply #16 Sunday, October 15, 2006 12:21 PM
Reply #16 Sunday, October 15, 2006 12:21 PM
I've been able to confirm that the wallpaper change options that work are:
1. At login
2. On Monday morning
Can not confirm the option for hourly, nor in the morning. Neither one appears to be working.
1. At login
2. On Monday morning
Can not confirm the option for hourly, nor in the morning. Neither one appears to be working.
lesoneil
Reply #17 Monday, October 16, 2006 3:40 AM
Reply #17 Monday, October 16, 2006 3:40 AM
I've started to worry but it looks like I'm not the only one. My wallpaper changer set to change every hour also doesn't work
WindowBlinds 5.1 System Information Report:
STATUS : WB+ SRV+ HLP+ UI+ TRAY+
WindowBlinds is installed correctly on this PC.
WindowBlinds appears to be activated on this PC
Your machine supports per pixel borders on WindowBlinds skins.
You have one monitor in total.
(hp f1503 Flat Panel Monitor) 1 is attached to NVIDIA GeForce4 MX 440
Wblind.dll 2006/10/09 10:24:20
Wblind64.dll 2006/10/09 11:51:37
Wbsrv.dll 2006/10/09 10:40:18
Wbconfig.exe 2006/10/10 16:39:13
Wbload.exe 2006/03/13 16:54:14
Wbhelp.dll 2004/09/18 16:37:07
Wbui.dll 2005/12/06 20:29:06
Tray.dll 2006/04/13 17:29:23
WindowBlinds 5.1 System Information Report:
STATUS : WB+ SRV+ HLP+ UI+ TRAY+
WindowBlinds is installed correctly on this PC.
WindowBlinds appears to be activated on this PC
Your machine supports per pixel borders on WindowBlinds skins.
You have one monitor in total.
(hp f1503 Flat Panel Monitor) 1 is attached to NVIDIA GeForce4 MX 440
Wblind.dll 2006/10/09 10:24:20
Wblind64.dll 2006/10/09 11:51:37
Wbsrv.dll 2006/10/09 10:40:18
Wbconfig.exe 2006/10/10 16:39:13
Wbload.exe 2006/03/13 16:54:14
Wbhelp.dll 2004/09/18 16:37:07
Wbui.dll 2005/12/06 20:29:06
Tray.dll 2006/04/13 17:29:23
wscwebyoda
Reply #18 Monday, October 16, 2006 9:32 AM
Reply #18 Monday, October 16, 2006 9:32 AM
lesoneil... are you able to confirm that the wallpaper changer works with any of the other options???
Bichur
Reply #19 Monday, October 16, 2006 1:56 PM
Reply #19 Monday, October 16, 2006 1:56 PM
I haven't had a chance yet myself.
I'll give a couple of the option a try later tonight.
I'll give a couple of the option a try later tonight.
lesoneil
Reply #20 Monday, October 16, 2006 9:31 PM
It definitely works with "Change my wallpaper every time I logon", didn't have a chance to check any other options.
Reply #20 Monday, October 16, 2006 9:31 PM
| lesoneil... are you able to confirm that the wallpaper changer works with any of the other options??? |
It definitely works with "Change my wallpaper every time I logon", didn't have a chance to check any other options.
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!
|
|
Page 1 of 2 | |
|
|---|
Reply #1 Wednesday, October 11, 2006 11:07 PM
i've never tried it... i'll be back in an hour