Getting rid of that darned Flag on my Logoff screens
Saturday, May 21, 2005 by boopish | Discussion: New Users
I know there are lost of real talented skinners here...so I'm taking advantage of your vast supply of knowledge...just how the h-e-double toothpicks do you get rid of that darned flag on the logoff image??! I have tried: 1) removing the attribute 2) replacing it with a "Magic pink" image (just got a pink square or a a blank white spot) ARGGHH! 3) deleting the flag from the file, then resaving....but it just keeps coming back!!! I must be missing a crutial step or something! All help and advise greatly appreciated.
Cavan1
Reply #2 Saturday, May 21, 2005 1:49 AM
Not retarded, this is best way to have no flag that I know.
Reply #2 Saturday, May 21, 2005 1:49 AM
| my way might be totally retarded |
Not retarded, this is best way to have no flag that I know.
Fuzzy Logic
Reply #3 Saturday, May 21, 2005 2:56 AM
Reply #3 Saturday, May 21, 2005 2:56 AM
That flag is irritating. The 1x1 pixel option is the way to go 
crissy14
Reply #4 Saturday, May 21, 2005 8:26 AM
Reply #4 Saturday, May 21, 2005 8:26 AM
As Super Wizop Fuzzy Logic stated, reduce the logoff/shutdown flag to a 1x1 pixel graphic (in your paint program). If you blend the color in with the upper right section of your shutdown dialog, it wont show at all. If you dont blend it, it will show as a tiny dot, but most people wouldnt even notice it.
boopish
Reply #5 Saturday, May 21, 2005 9:02 AM
Reply #5 Saturday, May 21, 2005 9:02 AM
Thank You, Thank you , Thank you!!!! Now I am one happy girl who will probably spend the better part of her weekend removing those flags from the stuff I made!!! 
crissy14
Reply #6 Saturday, May 21, 2005 9:49 AM
Reply #6 Saturday, May 21, 2005 9:49 AM
Sorry Master Apprentice causticFX, I didnt notice that you had suggested the 1x1 pixel thingy first. ( thats what I get for not reading the whole thread thoroughly) I take back the credit I gave to Super Wizop Fuzzy Logic and give it to you. 
. (just kidding fuzzy)
Citizen boopish...glad you were able to get an answer..I"ll look forward to your skin.
. (just kidding fuzzy) Citizen boopish...glad you were able to get an answer..I"ll look forward to your skin.
boopish
Reply #7 Tuesday, May 24, 2005 10:21 PM
Reply #7 Tuesday, May 24, 2005 10:21 PM
Thanks for the help, people...but how the heck does one blend it in??? I am a real newbie with photoshop and Skin studio, so details really help Not to mention that I am older than dirt, obcessed with getting this right and not putting anything up until it's just so!!!
Not to mention that I am older than dirt, obcessed with getting this right and not putting anything up until it's just so!!!
crissy14
Reply #8 Tuesday, May 24, 2005 11:10 PM
Reply #8 Tuesday, May 24, 2005 11:10 PM
Citizen boopish
To blend in the shutdown flag that you have reduced to 1x1 pixel, do this: Say the upper right corner of you shutdown dialog is blue, use your color picker (in your paint program) to match that blue color, then use that color to fill the 1x1 pix graphic. Then "save" the graphic, and it should blend right in. Even if you dont match the color, It will show up only as a tiny dot, that unless it's a complete oppsite color, wont hardley even be noticed. Just a little note: That 1x1 pixel dot will end up at approx these coordinates on your shutdown doalog 286 pixels accross (from the left) and 19 pixels down (from the top) so try to match the color in that area. Does that clear things up or just make it more confusing?
To blend in the shutdown flag that you have reduced to 1x1 pixel, do this: Say the upper right corner of you shutdown dialog is blue, use your color picker (in your paint program) to match that blue color, then use that color to fill the 1x1 pix graphic. Then "save" the graphic, and it should blend right in. Even if you dont match the color, It will show up only as a tiny dot, that unless it's a complete oppsite color, wont hardley even be noticed. Just a little note: That 1x1 pixel dot will end up at approx these coordinates on your shutdown doalog 286 pixels accross (from the left) and 19 pixels down (from the top) so try to match the color in that area. Does that clear things up or just make it more confusing?
boopish
Reply #9 Wednesday, May 25, 2005 12:51 AM
Reply #9 Wednesday, May 25, 2005 12:51 AM
Thanks Master Apprentice crissy 14!! This makes it alot clearer!!! I was still getting a bit of a white dot in some cases...which IMO stuck out like a sore thumb!! I appreciate your help!
UzEE
Reply #10 Wednesday, May 25, 2005 1:04 AM
Yep this is the way. Previously I thaught it was Just my way, but know its relaxing to see others doing it too.
Reply #10 Wednesday, May 25, 2005 1:04 AM
| my way might be totally retarded Not retarded, this is best way to have no flag that I know |
Yep this is the way. Previously I thaught it was Just my way, but know its relaxing to see others doing it too.
crissy14
Reply #11 Wednesday, May 25, 2005 1:17 AM
Reply #11 Wednesday, May 25, 2005 1:17 AM
Citizen boopish
No problem
UzEE........... is.....back.....!
No problem
UzEE........... is.....back.....!
UzEE
Reply #13 Wednesday, May 25, 2005 11:05 PM
Nice to see you too Criss
Reply #13 Wednesday, May 25, 2005 11:05 PM
| UzEE........... is.....back.....! |
Nice to see you too Criss
WebGizmos
Reply #14 Thursday, May 26, 2005 5:09 AM
Reply #14 Thursday, May 26, 2005 5:09 AM
Archangel_Douglas...when you go to logoff/shutdown windows...the dialog box that comes up sometimes shows the Windows Logo flag at the top right of that box. Some people have figured out how to make it disappear so you may have not even noticed it when using some WB's.
Archangel_Douglas
Reply #15 Saturday, May 28, 2005 11:11 PM
Reply #15 Saturday, May 28, 2005 11:11 PM
oooh that.. think i know what you mean. its never on the logons i create so i completely forgot about it.
theres a line, or part of a line that adds the "flag" (or rather, an image that is the flag), so you can just cut it out i think. id have to crosscheck it with my logons, but i think thats how i do it.
theres a line, or part of a line that adds the "flag" (or rather, an image that is the flag), so you can just cut it out i think. id have to crosscheck it with my logons, but i think thats how i do it.
kona0197
Reply #16 Sunday, May 29, 2005 1:26 AM
Reply #16 Sunday, May 29, 2005 1:26 AM
Crissy - UzEE has been back for quite some time now. You must have been gone the day he apoligized to us all and decided to behave on the boards.
Cavan1
Reply #17 Sunday, May 29, 2005 2:22 AM
Reply #17 Sunday, May 29, 2005 2:22 AM
Hey Doug, is about flag on logoff and turnoff for WindowBlind skins.
crissy14
Reply #18 Sunday, May 29, 2005 6:32 AM
Reply #18 Sunday, May 29, 2005 6:32 AM
Skinner kona0197
Yes I have been gone alot. My freakin PC keeps going down. Lots of reformats. Time for a new one........if only I could afford one.
Yes I have been gone alot. My freakin PC keeps going down. Lots of reformats. Time for a new one........if only I could afford one.
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!
Reply #1 Saturday, May 21, 2005 12:54 AM