Ive got a small problem...

Tuesday, December 9, 2003 by EventHorizon | Discussion: WinCustomize Talk

...with my wireless NIC on our laptop.

After it (the computer) boots up, I plug in the card (it's PCMCIA)...it warms up...then, right after the little speech-bubble saying 'wireless connection found' (or whatever)...the computer freezes...So, I pull the card out and it works...for about 5 seconds.

Then I get WinXp's modified version of the BSoD that says something like , Windows has detected an error, and has been shut down to prevent damage to your computer... It also says something about ndis.sys in the technical info.

It used to be just every couple times or so it did this, but now its invariable, and makes checking email impossible...Or close to it...luckily, Ive got a wired 10/100 Nic that doesnt freeze the comp, but (for various reasons) this is only a temporary solution.

Ive tried re-installing the drivers, but this doesnt help...
First Previous Page 2 of 4 Next Last
IPlural
Reply #21 Tuesday, December 9, 2003 2:32 AM
same here Travis, childhood amoung other things can do that to a people
kongit
Reply #22 Tuesday, December 9, 2003 2:34 AM
funny, during childhood I never had the problem, it started when I was about 18. And came with it a host of other problems that I don't want to remember (my senior year in high school I was barely there). Over all that now
EventHorizon
Reply #23 Tuesday, December 9, 2003 2:35 AM
The wired is a CNet and the wireless is D-Link AirPlus Xtreme G

(Who thinks up these dumb names...I mean come on...Xtreme G?)
kongit
Reply #24 Tuesday, December 9, 2003 2:37 AM
it sounds like a defective card, but I know little in the terms of wireless. It took me 4 hours to get a wireless adapter to work with my 3com card at my parents house. here at my dorm I am treated with a 10meg direct connection. Its kind of sad that I don't want to go home over break to a dsl connection because its so much slower
IPlural
Reply #25 Tuesday, December 9, 2003 2:38 AM
Go into Administrative Tools/Event Viewer/System and look for a red circle with an X in it, error....

See what it tells you if anything about the NIC, it sounds to me as if your needing an update on the nic driver. NDIS is not being assigned correctly to that specific nic, though it works fine with the wired wired nic...
EventHorizon
Reply #26 Tuesday, December 9, 2003 2:40 AM
K.. will try...
IPlural
Reply #27 Tuesday, December 9, 2003 2:41 AM
pull the nic and let me know what revision the nic is, it is part of the serial number

it is the last three chars of the serial number for the nic

like "V.C1" at the end of the serial number string...

[Message Edited]
EventHorizon
Reply #28 Tuesday, December 9, 2003 2:42 AM
There are so many little X's in there its not even funny...Most of them say the source is Dhcp...
EventHorizon
Reply #29 Tuesday, December 9, 2003 2:44 AM
S/N is BN2K234000481

So, 481...
EventHorizon
Reply #30 Tuesday, December 9, 2003 2:48 AM
It also has...

H/W: B2

F/W: 2.20

Not sure what those are...
[Message Edited]
IPlural
Reply #31 Tuesday, December 9, 2003 2:48 AM
Ok...

Do you have a static IP address you've assigned to that DWL-g650 108mbit nic?

If your using DHCP it sounds as if the router is either not allowing the MAC address of that NIC to have a new IP address assigned to it, and/or your laptop is not releasing the slot the nic is inserted into when you pull it and replug it...

IPlural
Reply #32 Tuesday, December 9, 2003 2:50 AM
It also hasH/W: B2F/W: 2.20


H/W:B2 is the revision
and
F/W:2.20 is the revision of the firmware flash burned into the nic...

let me check to see if there is an update for it and also see what it says about not releasing the slot in XP if anything...
IPlural
Reply #33 Tuesday, December 9, 2003 2:52 AM
http://support.dlink.com/Products/view.asp?productid=DWL-G650_revB

yep there is an update...

might have to apply a matching update for the router to the router also....

checking on what it says now about known issues with XP and the older revision...
IPlural
Reply #34 Tuesday, December 9, 2003 2:54 AM
from the site...


Due to the fact that you have attempted to install the drivers for the
wireless adapter, the device manager might be holding multiple copies of
the drivers which might be preventing the drivers from being loaded
properly. In order to address the problem, please do the following:

Step 1 Access your laptops safe mode. If you have any questions on how to
so, please consult your laptop manual.

Step 2 Once in safe mode, access the device manager (right-click my
computer, left-click properties, left-click on the hardware
tab, left-click on device manager). Expand the network adapters
category and determine if there are multiple copies of the driver. If
so, please uninstall them one by one until they are removed completely.

Step 3 Go to control panel, add/remove programs, and uninstall the
D_Link configuration utility for the DWL-G650 wireless adapter.

Step 4 At this point, restart the laptop and eject the wireless card.

Step 5 Make sure that there are no background utilities running such as antivirus, crash guard, or firewall. If so, please disable them.

Step 6 Run the installation CD in order to install the drivers for the DWL-G650 wireless adapter. When done, insert the wireless adapter into the laptop.

Step 7 If the laptop has a built-in ethernet adapter, please make sure that you disable it.

--------------------------------------------------------------------------------
EventHorizon
Reply #35 Tuesday, December 9, 2003 2:55 AM
Heres some info from one of the errors...

Your computer was not assigned an address by the network (from the DHCP server) for the network card with the network address 4553547777.

The semaphore timeout period has expired. your computer will try to obtain an address on its own from the network (DHCP) server.

Word for word.

Oh, its a 54mb/s.
EventHorizon
Reply #36 Tuesday, December 9, 2003 2:58 AM
Thats another thing...every now and then, when I put the card in, it says "New PCI device found" even thought Ive installed the drivers...then after I restart or wait a minute or two, it behaves normally...
[Message Edited]
IPlural
Reply #37 Tuesday, December 9, 2003 2:59 AM
you have to be using encryption at 128 bit to hit 108 mbit...

open a dos window and type "ipconfig /release" and then "ipconfig /renew" and see if it resets your nic so it functions correctly...
IPlural
Reply #38 Tuesday, December 9, 2003 3:01 AM
XP doesn't like that unsigned driver much it seems...

I'd do the updates, make sure you read the instructions and follow them to a T...

and then see if you have the same problem, Tech support is going to tell you to do this before they will do a RMA so you will be a jump ahead of them if it comes to that...

though, it is a driver/xp conflict of some sort happening for some reason...
EventHorizon
Reply #39 Tuesday, December 9, 2003 3:15 AM
Getting driver...
EventHorizon
Reply #40 Tuesday, December 9, 2003 3:32 AM
Ok, I installed it and restarted...

Please login to comment and/or vote for this skin.

Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:

  • Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
  • Access to a great community, with a massive database of many, many areas of interest.
  • Access to contests & subscription offers like exclusive emails.
  • It's simple, and FREE!



web-wc01