CPU fan dying....
Monday, February 18, 2013 by Jafo | Discussion: Personal Computing
Well...I guess it takes/took 10 days or so of over 30c weather... but after x years of almost permanent running my V8 Coolermaster fan decided to bugger off and go troppo.
It's not like it was ever an issue.....until a shutdown/reboot ...cos I never shutdown.....
But then silly old me did.
So the fan said time for a holiday and shut up shop.
I got it kick-started one time with some compressed air and a poking or three....
...but today it said 'no way, Jose, find some other poor sucker..' [or in this case....blower].
Fortunatement I'd had a wee chat with yrag and he'd suggested a spiffy thing made by Noctua....yes, wait for it.....
...a FAN.
So I had just received a pair of 'em just this same day....fortuitous or what?
Now....my system was still failing to boot....BIOS having a hissy-fit that the CPU fan was having 'issues' namely it was AWOL.
So....not to be outdone I unplugged the fan from the V8 and plugged in the new trendy NF-F12 and figured...hey, no sweat...I'll just plonk it on top of the V8....it can do its blowing from there.....
And the system is a happy chappy....as I type this....fan hanging half out of the case....temps on average DOWN 6c.
Who needs to fit the thing actually INTO-THE-COOLER?
System won't know itself when I put both of them in.....PROPERLY....![]()
Reply #62 Tuesday, February 19, 2013 1:32 AM
Yes, that's what I did.
The default coolermaster fan in the V8 is clearly not very good...it snuffed it after 3.5 years continuous.
The fins and pipework, however is good...so it's simple enough to swap out the fan with a BETTER one. The only 'stupidity' in its design is the two screws on the bottom that require the whole animal be removed.
I left them off this time...so next time I need to swap a fan it'll take about 5 minutes...![]()
Re 'warranty' that's pointless as the system was dead without a cpu fan...and if I were to sit on my thumbs waiting for a replacement [assuming it was still under warranty] about all I'd get would be a sore bum.
Downtime is not an option.
Reply #63 Tuesday, February 19, 2013 1:33 AM
I've been reluctant to get one of those automobile sized radiators to cool my cpu when I decide to overclock my rig. I still have the stock cooler and haven't overclocked it yet, but I was thinking about a water cooler when I do. I worry about leakage though. I'm also going to upgrade that Sapphire 7770 GPU to a high end Nvidia after a while.

Reply #64 Tuesday, February 19, 2013 2:15 AM
I have had a couple water cooled rigs , and yes ,they are bulky and not real pretty. But I've never had a leakage problem as they are specifically designed and built to prevent such a catastrophy. I don't really worry about looks most of the time in my builds, I'm too dang worried about keeping everything cool .. LOL. I can tell you for a fact, this big machine I'm using right now generates and pumps out enough heat to keep my bedroom warm with all my floor vents closed in the middle of winter. It's an energy hog with no doubt and spins up with 12 cooling fans to keep it purring. -- Ace --
Reply #65 Tuesday, February 19, 2013 3:09 AM
They have easier to use "compact" water cooling options now. I've been tempted to get one, but my CM Hyper 212-EVO just does such a good job, I have no reason to upgrade. Two fans in a push/pull config have my 4 year old energy hog of a cpu (955BE) idling at 27c, load at 42c. It's getting to be that time again to build a new rig, but money's tight and this one still runs like a champ.
As to the OP, I had my rig set up like that at one time. It wasn't due to the cpu fan dying though, it was because I didn't realize there was a secret dust screen in-between my intake fans and the front of the case.
Reply #66 Tuesday, February 19, 2013 9:14 AM
Okay, then.
Mine looks a little different internally now [different CPU cooler and PSU], but I'll get some newer pics when I pull the beasty out of its pigeonhole later.



Specs are as follows:
PSU: Silverstone 1200w 80PLUS Gold ST1200-G-EVO
Mobo: Gigabyte GA-990FXA-UD5
CPU: AND FX8350 x8 @ 4.0ghz.
CPU Cooler: Thermaltake FRIO OCK
RAM: Corsair DDR3 CMX16GX3M4A1333C9 x2 = 32gb
GPU" Gigabyte GV-N560OCTi
SSD: Corsair 120GB Force Series 3 SSD x2 in RAID0
HDD: WD Caviar Green 2Tb x2
Sound: Creative Soundblater X-Fi Fatality Pro w front panel.
I haven't attempted to overclock at this point, but I may do so in the next week or so.
Reply #67 Tuesday, February 19, 2013 9:49 AM
Starkers,that has to be the best cable management I have ever seen. Very tidy!
Reply #68 Tuesday, February 19, 2013 9:57 AM
Yes, I spent a while on it to achieve a tidy internal environment and provide the best airflow I could.
Mind you, the case helped make it all possible. Thermaltake put a lot of thought into the design and ensured the cable management was/is first class.
Reply #69 Tuesday, February 19, 2013 10:04 AM
damn it, mark! make those pics larger. those little thumbnails aren't good for us old folks with aging eyes.
![]()
Reply #72 Tuesday, February 19, 2013 2:11 PM
Quoting Wizard1956,
reply 67
Starkers,that has to be the best cable management I have ever seen. Very tidy!
Yes it is! I got lazy at the end when everything tested good and didn't go as far as Starkers did.
Mine started out with neat in mind but a DVD burner and GFX card change, an SSD addition in a 3.5" tray with fan, a card reader and another HDD added along with another 2 case fans and a speed controller...well, neat has gone out the window. Which I am glad my case doesn't have, BTW. It might scare people to see inside the thing.
Reply #73 Tuesday, February 19, 2013 3:03 PM
Yeah, I'll re-upload larger ones later when I take some new ones showing the current state.
Like WHOA!!!! That'd have to be one of the dirtiest cases I've ever seen... could damn near grow potatoes in there.
EDIT: dunno what's going on, but my keyboard misses every so often, thus producing a typo with words sometimes missing letters.
Now Shaunna would say something like "Pitch the bastard to the shithouse", but I think I'll persevere with it a bit longer/maybe try updating the drivers.
Reply #74 Tuesday, February 19, 2013 3:45 PM
Ya I still like your box Starkers.
Mine would never end up that tidy though. I have to admit I kind of like Jafo's with the fan parked on the cpu, there's a certain charm about it and it's more like something I'd end up with
Reply #75 Tuesday, February 19, 2013 4:06 PM
It was quite easy to keep tidy, given it's such an easy case to work with.
First: all PSU cables went outside the case through the designated slot.
Second: most of the cable work was done outside the case and fastened down to maximise airflow, etc.
Third: only necessary cables came back inside the case through designated slots and were fastened down.
Easy as falling off a [slippery] log.
And the other thing.... I take pride in my work.
Reply #76 Tuesday, February 19, 2013 4:18 PM
Cable management has always been a PITA for me. I just use many zip ties. I would love to have a case like that Starkers. ![]()
Reply #78 Tuesday, February 19, 2013 5:03 PM
wow Starkers, very very impressive ! Those are some awsome specs and you've got a killer machine going on there. Nice job on the cable management as well. I like the way you have your airflow maximized. I'm adding your pics to my "Bad-Ass" machine display board here in my hobby lab. Thanks !
-- Ace --
P.s. - by the way, I always include the specs with the pictures when I have them, you gotta know what's "under the hood" when browsing the pics on my board.
Reply #79 Tuesday, February 19, 2013 6:25 PM


Corsair Obsidian Series 800D CC800DW Black Aluminum / Steel ATX Full Tower Computer Case
ASUS Maximus V FORMULA LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 Extended ATX Intel Motherboard
Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155 77W Quad-Core
XIGMATEK Dark Knight II SD1283 Night Hawk Edition CPU Cooler
2 Galaxy GeForce GTX 670 GC 4GB 256-bit GDDR5 in SLI configuration
CORSAIR Professional Series Gold AX1200 1200W ATX12V
CORSAIR Dominator Platinum 32GB (4x8GB)
Western Digital VelociRaptor 500GB 10000 RPM 64MB
SAMSUNG Internal DVD Writer 22X DVD x 2
Microsoft Windows 7 Ultimate
Reply #80 Tuesday, February 19, 2013 7:03 PM
Ernie Leo, what no rocket launch pad! Very nice.
Please login to comment and/or vote for this skin.
Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:
- Richer content, access to many features that are disabled for guests like commenting on the forums and downloading skins.
- Access to a great community, with a massive database of many, many areas of interest.
- Access to contests & subscription offers like exclusive emails.
- It's simple, and FREE!








Reply #61 Tuesday, February 19, 2013 1:13 AM
Doesn't coolermaster have a warranty on their parts??